FULL LIST OF SHOTGUN GUNSMITHING PRICING

Please note that prices do not reflect shipping and taxes.

***Please note, we do not work on ANY class 3 firearms. 

Gunsmith Labor Per Hour $95.00  
Action Work
Action Job (click to view) $110.00 TSL-1
Convert auto safety to manual $105.00 GDAS
Drill & tap per hole $75.00 GDT
Ejector fitted & timed - per ejector $210.00 GFITEJ
Makes both your ejectors fire at the same time
Beretta EZ lever supplied & installed $130.00 GBEREZ
Benelli EZ lever supplied & installed (NOT Ethos or SBEIII) $130.00 GBEZ
Benelli EZ lever supplied & installed (Ethos and Benelli SBEIII) $155.00 GETHOSEZ
Make New Firing Pin - per firing pin $165.00 GFP
(made from a blank piece of steel)
Inertia Conversion for Inertia Systems
Makes your second barrel ready to fire with a minimum amount of recoil, suitable for firing 410 bore shells.
Most models $150.00 G36
Beretta DT10, Beretta  DT11, Browning 725, and Caesar Guerini models. $200.00 G37
K-32 adjustable trigger shoe conversion (K-80 style) (click to view) $325.00 GK32
Perazzi adjustable trigger shoe conversion (includes gold plating) (click to view) $425.00 GK32P
Open Loading Port (click to view) $225.00 GOPENLP
Rejoint action & tighten forearm $500.00 GRA
This is a tightening process where your existing barrels are fitted tighter to your receiver.
Strip & clean (auto or pump) (click to view) $105.00 GSC
Strip & clean (O/U or S/S) (click to view) $165.00 GSICO
Strip & clean (premium shotgun) $250.00 GSCDP
Trigger job (per side) (an O/U or S/S has two triggers) (No trigger work on Browning Cynergy) (Click to view) $125.00 GTRIG
Barrel Work
Back bore (per hole) (Click to View) $165.00 GBB
The inside diameter is opened to a specific size
Barrel fitted to receiver (O/U or S/S) $500.00+ GBF
Bead installed (includes drilling & tapping) $75.00 GBDS
Replace front or mid bead (no drill and tap) $35.00 GBDS1
Install Hi-Viz Comp Sight (includes sight) $105.00 HV
Bore match $120.00 BOREM
We bore out the smaller barrel to match the inside diameter of the other barrel, so both bores are exactly the same diameter.
Carrier Barrel (customer provides barrel) $625.00 CB
The maximum amount of inside barrel material is removed in an effort to make the barrel weigh the same as it did before a sub-gauge tube set is installed. This makes the barrel unable to fire 12 ga. shells.
Chamber sleeve (same gauge) each $295.00 GSLEEVESG
A chamber sleeve is inserted then made to the correct size. This is done when a chamber is over sized or damaged.
Chamber sleeve (down one gauge) each $395.00
The existing chamber of a shotgun barrel is down-sized one ga, ie 12 ga to 16 ga.
Choke Alterations (per hole) $105.00 GBORE
Modify your existing fixed choke to a more open restriction.
Cut, crown & reinstall bead $95.00 GC/C
Cut & crown barrel, install ramp sight $375.00 GCC1
Cut & crown barrel, and reinstall hanger $475.00 GCC2
Dent or budge removed & lap bore $135.00 GDL
Not all dents or bulges can be removed depending on the location and severity.

Drill & tap per hole $75.00 GDT
Ejector fitted & timed (each) $210.00 GFITEJ
Engine turn (jewelling) $150.00 GET
Gas ports opened on autoloader $105.00 GOPEN
Headspace Rings (per hole) $250.00 GHR
This is done to correct a headspace problem which is usually too deep.
Lengthen chambers to 3” (subject to inspection) (each chamber) $105.00 G3CHAM
Lengthen forcing cone (click to view) $105.00 LFC
The step between the chamber & barrel is removed creating a smooth taper which is then polished. This aids in the reduction in recoil and improves the shot pattern.
Polish bore (each) $105.00 GPOLB
Polish chamber (each) $105.00 GPOLCH
Port auto or pump barrel  (Click to view)   +$50 for Camo or Coated $125.00 PORT1
Port both barrels (O/U)  (Click to view)  +5$0 for Camo or Coated $195.00 PORT2
Quote / estimate / evaluation fee (waived if work is performed) $75.00 GQ
Sling swivel installed (parts not included) $135.00 SWIV
Shoot for point of impact $175.00 GPAT
Makes sure that the point of impact is in line with the sights
Strip & relay ribs $895.00 GSL
Your existing ribs are removed and then soldered back in place. This process includes a reblue.
Refinishing
Bluing Polished (Hot Salt)
Blue Complete O/U,S/S (If BBL requires Slow Rust, then +$100) $650.00 GBLUECG
Blue Complete Auto/Pump $600.00 GBLUEAP
Barrel only (O/U or S/S) $425.00 GBLUE
Barrel only (auto or pump) $395.00 GBLUEABP
Action & forearm $495.00 GBLUEAF
Receiver Only (O/U, S/S, Auto, Pump) $425.00 GBLUER
For high polish add $175.00+ GHP
Bluing Satin Bead Blast (Hot Salt)
Barrel only (O/U, S/S, Auto, Pump) $350.00 GBLUEABB
Receiver Only (O/U, S/S, Auto, Pump) $350.00 GBLUERB
Complete (Most O/U, S/S, Auto, Pump) $525.00 GBLUECGB
Brown Damascus Barrel $695.00 GBROWN
Camo or Cerakote
Stock only $325.00 GCAMO
Camo Complete Shotgun (O/U, S/S, auto, or pump) $475.00 GCAMOC
Cerakote Complete Shotgun or Rifle $475.00 GCERAKOTE
Cerakote Barrel Only $275.00 GCERAKOTEB
Case color receiver $750.00 GCC
Electroless nickel receiver $750.00 GENICKEL
French grey $795.00 GFRGREY
Gold plate trigger (each) $165.00 GTGOLD
Parkerizing (most guns) $325.00 GPARK
Rust Blue Barrel (slow rust) $525.00 GRUSTBB
Rust Blue Receiver (slow rust) $525.00 GRUSTBR
Stock Work
Adjustable comb installed (most guns) $425.00 GAC
Stock Bending $150.00 GBEND
Adjustable recoil pad plate (most guns and includes Kick Eez pad) $400.00
Graco 575 Adjustable LOP Plate GGRACO575
Jones Adjustable Butt Plate GJONES
Pad installation (includes pad) (Click to view before and after)
Kickeez (black) or Pachmayr (black or brown) $150.00 GPAD
Leather $475.00 GPADL
Install Customer Supplied Pad $95.00 GPADCS
Spacers (each) $20.00 GSPACE
Recoil Systems
GRACO Gracoil GC15S $595.00 GGRACO
GRACO Gracoil GC15LP (Adjustable Length of Pull) $650.00 GGRACOGC15LP
Install ISIS Recoil Syetem $650.00 GISIS
Wood Refinishing & repairing POR GWOOD